30 Apr Combine both codes or make it work with 2 separate tabs. I am using Arduino Ethernet Shield W5100 with Arduino UNO trying to send a notification to PushSafer. Each code works individually
Combine both codes or make it work with 2 separate tabs. I am using Arduino Ethernet Shield W5100 with Arduino UNO trying to send a notification to PushSafer. Each code works individually but I cannot get to work together.
Combine both codes or make it work with 2 separate tabs. I am using Arduino Ethernet Shield W5100 with Arduino UNO trying to send a notification to PushSafer. Each code works individually but I cannot get to work together.
Pushsafer.ino
#include <SPI.h>
#include <Ethernet.h>
// Network settings
byte mac[] = { XXXXXXXXXXXXXXXXXXXXXX}; // Modify with your Ethernet shield's MAC address
IPAddress ip(XXXXXXXXXX); // IP address for the Arduino (modify according to your network settings)
// PushSafer private or alias key
String privateKey = "XXXXXXXXXXXXXXXXX";
String deviceID = "XXXX"; // Device ID for targeting a specific device
// Ethernet client
EthernetClient client;
void setup() {
// Initialize serial communication
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect.
}
// Initialize Ethernet connection
if (Ethernet.begin(mac) == 0) {
Serial.println("Failed to configure Ethernet using DHCP");
// Try to configure using IP address instead of DHCP:
Ethernet.begin(mac, ip);
}
delay(1000); // Give the Ethernet shield a second to initialize
}
void sendPushSaferMessage(String message) {
if (client.connect("www.pushsafer.com", 80)) {
Serial.println("Connected to PushSafer");
// Make a HTTP request:
client.println("POST /api HTTP/1.1");
client.println("Host: www.pushsafer.com");
client.println("Content-Type: application/x-www-form-urlencoded");
String postData = "k=" + privateKey + "&d=" + deviceID + "&m=" + message;
client.print("Content-Length: ");
client.println(postData.length());
client.println();
client.print(postData);
Serial.println("Message sent");
} else {
Serial.println("Connection failed");
}
// Give the web server time to respond, then disconnect
delay(500);
if (client.connected()) {
client.stop();
}
}
void loop() {
// Send a test message
sendPushSaferMessage("Hello from Arduino!");
delay(60000); // Wait a minute before sending the next message
}
Second Part
Alarm_System.ino
#include <LiquidCrystal_I2C.h>
#include <Keypad.h>
#include <Wire.h>
#define alarmPin A1
#define pirPin 11
#define greenLED 12 // Green LED pin
#define redLED 13 // Red LED pin
int offMsg = 0;
String passwd = "1234";
String inpswd;
bool activated = false;
bool activateAlarm = false;
bool activeAlarm = false;
bool passwdEntered;
const byte rows = 4;
const byte cols = 4;
char keypress;
char keys[rows][cols] = {
{'1','2','3','A'},
{'4','5','6','B'},
{'7','8','9','C'},
{'*','0','#','D'}
};
byte rowPins[rows] = {10, 9, 8, 7};
byte colPins[cols] = {3,2,1,0};
Keypad kp = Keypad(makeKeymap(keys), rowPins, colPins, rows, cols);
// Initialize the LCD. The I2C address is 0x27 and it has 16 columns and 2 rows.
LiquidCrystal_I2C lcd(0x27, 16, 2);
void setup() {
lcd.init(); // Initialize the LCD
lcd.backlight(); // Turn on the backlight
pinMode(alarmPin, OUTPUT);
pinMode(pirPin, INPUT);
pinMode(greenLED, OUTPUT);
pinMode(redLED, OUTPUT);
}
void loop() {
if (activateAlarm) {
lcd.clear();
lcd.setCursor(0,0);
delay(500);
lcd.print("System Online");
digitalWrite(greenLED, HIGH);
activateAlarm = false;
activeAlarm = true;
}
if (activeAlarm == true) {
if (digitalRead(pirPin) == HIGH) {
tone(alarmPin, 1000);
digitalWrite(greenLED, LOW);
digitalWrite(redLED, HIGH);
lcd.clear();
password();
} else {
digitalWrite(redLED, LOW);
digitalWrite(greenLED, HIGH);
}
}
if (activeAlarm == false) {
digitalWrite(greenLED, LOW);
if (offMsg == 0) {
lcd.clear();
lcd.setCursor(1,0);
lcd.print("Press 'A' To");
lcd.setCursor(3,1);
lcd.print("Activate");
offMsg = 1;
}
keypress = kp.getKey();
if (keypress == 'A') {
tone(alarmPin, 1000, 200);
activateAlarm = true;
}
}
}
void password() {
int cursor = 5;
inpswd = "";
activated = true;
lcd.clear();
lcd.setCursor(1,0);
lcd.print("Enter Password");
lcd.setCursor(0,1);
while (activated) {
keypress = kp.getKey();
if (keypress != NO_KEY) {
if (keypress == '1' || keypress == '2' || keypress == '3' || keypress == '4' ||
keypress == '5' || keypress == '6' || keypress == '7' || keypress == '8' ||
keypress == '9' || keypress == '0') {
inpswd += keypress;
lcd.setCursor(cursor,1);
lcd.print(keypress);
cursor++;
}
}
if (cursor > 9 || keypress == '#') {
inpswd = "";
cursor = 5;
lcd.clear();
lcd.setCursor(1,0);
lcd.print("Enter Password");
lcd.setCursor(0,1);
}
if (keypress == '*') {
if (inpswd == passwd) {
activated = false;
activeAlarm = false;
noTone(alarmPin);
digitalWrite(redLED, LOW);
offMsg = 0;
} else {
lcd.setCursor(2,1);
lcd.print("Incorrect");
delay(1000);
lcd.clear();
lcd.setCursor(1,0);
lcd.print("Enter Password");
lcd.setCursor(0,1);
}
}
}
}
